.png){kind=icon}
返回
Corner optimization for pocket machining
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ijmachtools.2004.04.011.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The aim of this paper is to propose a pocketing tool path improvement method by adapting the geometry of the tool path to the kinematic performance of high speed machining machine tools. The minimization of the machining time is a major objective, which should be taken into account for the tool path computation. In this way the tool path length can be reduced or the real feedrate increased. The described method proposes modification of the values of the corner radii in order to increase real feedrate. In the same way, this method checks the radial depth of cut variations along the tool path. The computed tool path presents a smaller length and the machine tool produces a higher average feedrate at the same time. In addition, the use of Bspline for the tool path computation is a significant improvement compared with straight lines and circle arcs for the machining time reduction. Several tests are realized on various machine tools in order to quantify the benefits: the proposed method can reduce the machining time by approximately 25% compared with classical tool paths computed using a CAM system. (C) 2004 Elsevier Ltd. All rights reserved.
Keyword:
pocket machining
feedrate optimization
tool path computation
high speed machining
bspline interpolation format
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
18.8
论文数:
3.6K
被引数:
1.8W
机构
暂无机构信息
引用论文
.png){kind=icon}
分享收藏
查看更多内容