Crack Development in Cementitious Materials under Impact Loading

doi:10.1557/proc-64-217

Crack Development in Cementitious Materials under Impact Loading

2011-02-25

0

PRE

AI

DOI：10.1557/proc-64-217

原文链接

摘要

En 中文

ABSTRACTFlexural specimens of hardened cement paste, fibre reinforced concrete, and conventionally reinforced concrete were tested in an instrumented dropweight impact machine, employing a 345 kg mass impact hammer dropped from a height of 500 mm. The crack development in the specimens was monitored using high speed motion picture photography, carried out at about 10,000 frames per second. It was found that, for all three specimens, some crack branching occurred. The cracks did not propagate in a continuous fashion; they appeared to arrest occasionally, and then began to grow again. However, it appeared as if the crack velocities reached a maximum value very soon after the impact occurred; they then decreased, and finally increased again just prior to failure. The average crack velocities were in the range of about 75 to 115 m/s.

Crack Development in Cementitious Materials under Impact Loading

摘要

AI总结

期刊

机构

引用论文