.png){kind=icon}
返回
Cutting Parameter Optimization when Machining Different Materials
.png){kind=icon}
PRE
AI
DOI：10.1080/10426914.2010.480998.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Flank wear occurring on the cutting edge increases as machining time goes on. This results in an increase in the cutting force and the surface roughness which leads to product quality deterioration. Predictive time models presented for flank wear, cutting force, and surface roughness in terms of machining conditions show that the parameters under investigation are sensitive to time, where the time factor must be considered not only for flank wear, but also for the power consumed and product quality. The finding in this study is that the dependency of cutting force and surface roughness on time is valid and cannot be ignored. It is found that tool flank wear can be expressed as a function of time in a valid model. A tool life model was constructed as a function of the presented independent variables for different workpiece materials. Optimization results were obtained and presented for maximizing tool life, minimizing production cost, or minimizing production time.
Keyword:
Cutting force
Machining
Optimization
Surface roughness
Tool geometry
Tool wear
Tool life
Turning
期刊
M
IF:
4.7
论文数:
4.6K
被引数:
9.3K
机构
引用论文
.png){kind=icon}
Dry turning of tempered martensitic stainless tool steel using coated cermet and coated carbide tools使用涂层金属陶瓷和涂层硬质合金刀具干车削回火马氏体不锈钢工具钢
PREAI
分享收藏分享收藏Parameter optimization of a multi-pass milling process using non-traditional optimization algorithms
PREAI
分享收藏
查看更多内容