返回
β-Cyclodextrin-modified high-performance black phosphorus-based battery separators
DOI:10.1016/j.matlet.2023.135827.png)
摘要
En 中文
The properties associated with battery separators are critical for achieving long cycle performance as well as fast charging/discharging of black phosphorus-based lithium-ion batteries. Current commercially available polyolefin separators (e.g. Celgard-2500) has an insufficient wettability and weak ionic conductivity, which could be affect to both capacity retention and high capacity of lithium-ion batteries. To improve the performance of the battery, one of the most effective methods is to coat functional materials on the surface of the separator. In this paper, beta-cyclodextrin (beta-CD) modified separator (CD-separator) was fabricated through simple vacuum filtration. With the merits of the unique properties of the beta-CD, such as the funnel effect, the ionic conductivity of the modified separator (named CD-separator) rise from 0.24 mS cm(-1) to 1.051 mS cm(-1). And the CD-separator exhibit a better compatibility with contact angle of 41.9 degrees, lower than that of polyolefin separator of 50.3 degrees. The battery with CD-separator exhibits a high reversible specific capacity of 1036.3 mAh/g at a high current density of 4.0 A/g after 1000 cycles, which much higher than that of the battery with polyolefin separator (e.g. Celgard-2500, 752.8 mAh/g).
Keyword:
beta-Cyclodextrin
Black phosphorus
Separator
Lithium-ion battery
Composite materials
Nanocomposites
期刊
IF:
2.7
论文数:
5.4K
被引数:
5.9W
机构
引用论文
A Flexible Sulfur-Graphene-Polypropylene Separator Integrated Electrode for Advanced Li-S Batteries用于先进li-s电池的柔性硫-石墨烯-聚丙烯隔膜集成电极
ADVANCED MATERIALS
IF26.8
Recent advances in functional modification of separators in lithium-sulfur batteries
DALTON TRANSACTIONS
IF3.3
Facile Separator Modification Strategy for Trapping Soluble Polyphosphides and Enhancing the Electrochemical Performance of Phosphorus Anode捕集可溶性磷化物并提高磷阳极电化学性能的简易隔膜改性策略
NANO LETTERS
IF9.1
Microporous Cyclodextrin Film with Funnel-type Channel Polymerized on Electrospun Cellulose Acetate Membrane as Separators for Strong Trapping Polysulfides and Boosting Charging in Lithium-Sulfur Batteries在电纺醋酸纤维素膜上聚合的具有漏斗型通道的微孔环糊精膜作为隔板,用于强捕获多硫化物并促进锂硫电池中的充电
没有更多内容

