返回
Damage detection in composite materials using frequency response methods
DOI:10.1016/S1359-8368(01)00050-6.png)
摘要
En 中文
Cost-effective and reliable damage detection is critical for the utilization of composite materials. This paper presents part of an experimental and analytical survey of candidate methods for the in situ detection of damage in composite materials. The experimental results are presented for the application of modal analysis techniques applied to graphite/epoxy specimens containing representative damage modes. Changes in natural frequencies and modes were found using a laser vibrometer, and 2-D finite element models were created for comparison with the experimental results. The models accurately predicted the response of the specimens at low frequencies, but coalescence of higher frequency modes makes mode-dependant damage detection difficult for structural applications. The frequency response method was found to be reliable for detecting even small amounts of damage in a simple composite structure, however the potentially important information about damage type, size, location and orientation were lost using this method since several combinations of these variables can yield identical response signatures. (C) 2002 Elsevier Science Ltd. All rights reserved.
Keyword:
polymer-matrix composites
vibration
finite element analysis
non-destructive testing
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
14.2
论文数:
1.2W
被引数:
8.9W
机构
暂无机构信息
引用论文
Vibration-based model-dependent damage (delamination) identification and health monitoring for composite structures - A review复合材料结构的基于振动的模型相关损伤 (分层) 识别和健康监测-综述
A national strategy for UK musculoskeletal clinical research: Arthritis Research UK clinical studies initiative
Rheumatology
IF0
Effect of fatigue loading on the modal properties of composite structures and its utilization for prediction of residual life
COMPOSITE STRUCTURES
IF7.1
Maintenance Crew Placement for Reliable Distribution Network: Using "Geographic Information Systems"

