.png){kind=icon}
返回
Damage identification for frame structures using vision-based measurement
.png){kind=icon}
OA
AI
DOI：10.1016/j.engstruct.2019.109634.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Extracting physical parameters for damage identification problems from full-field measurements is a promising research because of the recent spread of vision-based measurement techniques in the experimental mechanics. This paper presents a vision-based measurement framework using the camera system for damage identification. The framework is composed of four procedures: camera calibration, image processing, system identification and sensitivity analysis. In contrast to traditional finite-point measurements, the camera system allows considerably greater non-contact measurement flexibility. Such flexibility has two important benefits: first, less number of modes is required for modal-based damage identification problems; and second, more physical parameters could be extracted, taking advantage of the plentiful experimental data. A laboratory test comparing the camera system to traditional accelerometer measurement is conducted to confirm the above advantages. Further statistic analysis shows that the major drawback of this technique is that the camera system presents high levels of noise in small vibration responses at higher frequencies. Suitable strategies to circumvent this disadvantage are developed. Moreover, a technique for practical camera calibration without the requirement that the objective plane should be strictly perpendicular to the camera axis is also demonstrated and verified by the proposed laboratory test.
Keyword:
Vision-based measurement
Damage identification
Sensitivity analysis
Homography estimation
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.4
论文数:
2.1W
被引数:
8.7W
机构
引用论文
.png){kind=icon}
Model Updating of Railway Bridge Using In Situ Dynamic Displacement Measurement under Trainloads
PREAI
分享收藏Optimal spatial sampling interval for damage detection by curvature or strain energy mode shapes
PREAI
分享收藏Fourier spectral-based modal curvature analysis and its application to damage detection in beams
PREAI
分享收藏
查看更多内容