Damping estimation using enhanced virtual dynamic shaker: A web-enabled framework

doi:10.1111/mice.12531

2020-01-17

PRE

Dae Kun Kwon

Jae‐Seung Hwang *

Ahsan Kareem

DOI：10.1111/mice.12531

原文链接

原文求助

摘要

En 中文

Damping estimation from laboratory, full-scale, or computational simulation is critical in response prediction of structures under wind, waves, or earthquake effects. A virtual dynamic shaker (VDS)-based scheme was recently developed for system identification (SI) of structures for processing (weakly) stationary responses, that is, frequency and damping features that offers, especially the added advantage of its basic simplicity over other schemes. While the VDS has shown performance, equivalent to other popular SI schemes, it is based on the assumption of the global flatness of the load spectrum (i.e., white noise assumption) like used in most other SI schemes, which may not always be appropriate in practical applications. In addition, it is restricted to data from a single-degree-of-freedom (SDOF) response (or unimodal response) to obtain accurate modal characteristics. To address these potential shortcomings, this study revisits the VDS scheme and offers an enhancement by invoking local flatness assumption (EVDS) to possibly improve the damping estimation with the assumption that the load spectrum is flat only around the natural frequencies of the desired modes. A new formulation involving the effect of the ground motion induced vertical vibrations of a building is also introduced for both the VDS and the EVDS. Extensive examples through numerical simulation and full-scale data, including a comparison with other popular SI schemes, demonstrate the efficacy of the proposed EVDS scheme. To facilitate expeditious and convenient utilization of the proposed EVDS as well as the VDS, this study has implemented a web-enabled framework, named VDS-Damping, for on-demand and on-the-fly applications through user-friendly input and result interfaces. A recently developed mode decomposition scheme, state space-based mode decomposition (SSBMD), is implemented in the framework to assist in analyzing output from multiple modes and eliminates restriction of SDOF system. Accordingly, the SSBMD can also serve as a stand-alone mode decomposition tool to separate response in each mode. This framework enables users to estimate damping on-the-fly by uploading with ease their data.

Keyword:

UNSCENTED KALMAN FILTER

TUNED MASS DAMPERS

MODAL IDENTIFICATION

PARAMETER-ESTIMATION

INPUT