.png){kind=icon}
返回
Deep multiobjective design optimization of CFRP isogrid tubes using lichtenberg algorithm
.png){kind=icon}
PRE
AI
DOI：10.1007/s00500-022-07105-9.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The lattice structures use has increased in several sectors due to the potential for mass reduction without significant rigidity loss. In this paper, an isogrid tube multi-objective optimization considering six objectives is presented. The finite element method was applied to develop a numerical model for this complex structure, and a new optimization algorithm called the Multi-objective Lichtenberg Algorithm was used to find all the best possible designs. The optimizations were made considering two methodologies: (i) using a surrogate model derived from the design of experiments considering the response surface model and (ii) finite element updating, a direct link between the meta-heuristic and the numerical model. The latter is unprecedented in the literature for isogrid tubes and proved to be the best methodology, besides not even needing explicit equations. It discovered isogrid tube designs using TOPSIS that reduced at least 45.69% of the mass, 18.4% of the instability coefficient, 61.76% of the TW, and increased the natural frequency by at least 52.57%. The results show that optimizations via finite element updating associated with meta-heuristics not only allow the true interpretation of complex problems nature through real Pareto fronts, but can also deliver innovative results.
Keyword:
Isogrid structure
Lichtenberg algorithm
Multi-objective optimization
Composites
Buckling
期刊
IF:
2.5
论文数:
1.0W
被引数:
2.1W
机构
暂无机构信息
引用论文
Anisogrid composite lattice structures for spacecraft and aircraft applications.png)
COMPOSITE STRUCTURES
COMPOSITE STRUCTURESIF7.1
PREAI
分享收藏Analysis of failure loads and optimal design of composite lattice cylinder under axial compressionCOMPOSITE STRUCTURES
COMPOSITE STRUCTURESIF7.1
PREAI
分享收藏分享收藏
查看更多内容