.png){kind=icon}
返回
Defect identification in variable thickness waveguides using SH0 guided wave
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ndteint.2023.102886.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Guided waves, especially Lamb waves, propagating in plate-like structures with constant thicknesses have been investigated intensively in the past decades in the context of structural health monitoring (SHM) and non-destructive testing (NDT). However, structures with variable thicknesses are also very common in practice, such as ship hulls whose thickness varies for satisfying various load conditions, and defect identification for such structures is also of importance. In this paper, we compare the propagation characteristics of both Lamb modes and SH0 mode in variable thickness plates and propose to use the SH0 mode for defect identification in such waveguides because of its non-dispersive property. First, the non-dispersive property of the SH0 mode in waveguides with variable thickness is demonstrated in theory. Then, a wave prediction method is adopted to illustrate the differences between the Lamb modes and the SH0 mode when propagating in waveguides with constant or variable thickness. Finally, experiments are conducted on a variable thickness plate to verify the non-dispersive property of the SH0 mode and further compare the results with those of the Lamb modes. Recently developed thickness-poled omnidirectional shear horizontal piezoelectric transducers (OSH-PTs) are used to produce pure SH0 waves. It is observed that the velocity of the Lamb modes may change significantly and the group velocity of the S0 mode even decreases by 55.1% during propagation, which hampers Lamb modes from defect identification in variable thickness plates. By contrast, the SH0 mode is non-dispersive thus promising for damage detection, and its effectiveness for defect localization in such structures is validated experimentally.
Keyword:
Shear horizontal wave
Adiabatic modes
Variable thickness
Defect identification
期刊
N
IF:
4.5
论文数:
3.1K
被引数:
9.0K
机构
引用论文
Damage localization in composite structures with smoothly varying thickness based on the fundamental antisymmetric adiabatic wave mode基于基本反对称绝热波模式的厚度平滑变化的复合结构中的损伤定位.png)
ULTRASONICS
ULTRASONICSIF4.1
PREAI
分享收藏A rapid signal processing technique to remove the effect of dispersion from guided wave signals
PREAI
分享收藏A high-resolution structural health monitoring system based on SH wave piezoelectric transducers phased array基于SH波压电换能器相控阵的高分辨率结构健康监测系统ULTRASONICS
OAAI
ULTRASONICSIF4.1
OAAI分享收藏
查看更多内容