.png){kind=icon}
返回
Detector Based Radio Tomographic Imaging
.png){kind=icon}
OA
AI
DOI：10.1109/TMC.2017.2699634.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Received signal strength based radio tomographic imaging is a popular device-free indoor localization method which reconstructs the spatial loss field of the environment using measurements from a dense wireless network. Existing methods achieve high accuracy localization using a complex system with many sophisticated components. In this work, we propose an alternative and simpler imaging system based on link level occupancy detection. First, we introduce a single-bounce reflection based received signal strength model, which allows relating received signal strength variations to a large region around the link-lines. Then, based on the model, we present methods for all system components including a classifier, a detector, a back-projection based reconstruction algorithm, and a localization method. The introduced system has the following advantages over the other imaging based methods: i) a simple image reconstruction method that is straightforward to implement; ii) significantly lower computational complexity such that no floating point multiplication is required; iii) each link's measured data are compressed to a single bit, providing improved scalability; and iv) physically significant and repeatable parameters. The proposed method is validated using measurement data. Results show that the proposed method achieves the above advantages without loss of accuracy compared to the other available methods.
Keyword:
Device-free localization
radio tomographic imaging
radio wave reflection
signal detection
received signal strength measurements
back-projection reconstruction
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
9.2
论文数:
5.8K
被引数:
1.8W
机构
引用论文
分享收藏INTENSITY FLUCTUATION OF STATIONARY RANDOM NOISE CONTAINING AN ARBITRARY SIGNAL WAVE.png)
PROCEEDINGS OF THE IEEE
PROCEEDINGS OF THE IEEEIF25.9
PREAI
分享收藏Three unobtrusive domestic occupancy measurement technologies under qualitative reviewENERGY AND BUILDINGSOAAI
ENERGY AND BUILDINGSIF7.1
OAAI分享收藏
查看更多内容