.png){kind=icon}
返回
Develop a new strain rate sensitive solid-state pressure bonding model
.png){kind=icon}
OA
AI
DOI：10.1016/j.matdes.2022.110436.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Solid-state bonding is widely involved in metal forming and joining applications. The quality of the bonded interface is the key to the final integrity of the joint or formed structure; thus, its controllability and predictivity have been the focus over decades. The interface bond quality is jointly determined by the interface oxide behaviour and microstructure evolution. In this study, a new four-stage model, considering the cohesion of different contacting pairs (oxide-oxide, oxide-metal and metal-metal) and the reduced adverse effect of remaining oxides, is proposed to describe the bonding process under hot deforming conditions. This proposed model was validated through a range of hot compression bonding tests, using Gleeble under different strains (10%, 30% and 50%), strain rates (0.001 s(-1), 0.01 s(-1) and 0.1 s(-1)) at 1150 degrees C with references. Scanning electron microscope (SEM) and Electron Backscatter Diffraction (EBSD) were used to characterize the oxide behaviour and microstructure evolution. Tensile tests at room temperature were conducted on bonded samples and references to reveal the interface bond ratio. 100% bonding strength, equivalent to the base metal's strength and ductility, was achieved at the large strain of 50% for all three strain rates. Crown Copyright (C) 2022 Published by Elsevier Ltd.
Keyword:
Solid state
Bonding-by-hot-deforming
Strain rate
Bond quality prediction
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
M
IF:
7.9
论文数:
1.9W
被引数:
9.8W
机构
引用论文
Solid state bonding of Al2O3 with Cu, Ni and Fe:: characteristics and propertiesAl2O3与Cu，Ni和Fe的固态键合:: 特征和性能
PREAI
分享收藏
Soluble neodymium chloride 2-ethylhexanol complex as a highly active catalyst for controlled isoprene polymerization.png)
Polymer
PolymerIF0
PREAI
分享收藏
查看更多内容