返回
Developing a combustion-driven reactor for waste conversion
DOI:10.1016/j.energy.2021.121489.png)
摘要
En 中文
One of the problems of the scalability to industrial applications of pyrolysis reactors is the high electric energy consumption. In this study, a novel device in which a self-sustaining combustion front drives the input energy for pyrolysis is proposed. A new methodology to define a representative longitudinal temperature profile based on the time-averaged method at each thermocouple position is introduced. The reactor was tested under operating conditions of air velocities, and bed compositions. The reliability of twenty-nine runs was verified through repeatability, empirical dimensionless correlations, and analysis of variance. The temperature average standard deviation ranged from 30 degrees C to 54 degrees C, depending on the bed composition. The dimensionless analysis revealed the power-law relationship between temperature and inputs. The analysis of variance explained the independence of the input parameters on defining the longitudinal temperature profile. A positive energy balance ranging from 1.6 to 5.8 kWh/kg of initial fuel mass, a consequence of a self-sustaining combustion process, was a characteristic of all experiments. (C) 2021 Published by Elsevier Ltd.
Keyword:
Pyrolysis
Smoldering combustion
Charcoal
Longitudinal temperature profile
Temperature frequency distribution
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
9.4
论文数:
4.3W
被引数:
20.2W
机构
引用论文
Properties of charcoal derived from hazelnut shell and the production of briquettes using pyrolytic oil
ENERGY
IF9.4
Co-current combustion of oil shale - Part 1: Characterization of the solid and gaseous products
FUEL
IF7.5
Fiber-Optic Multipoint Sensor System with Low Drift for the Long-Term Monitoring of High-Temperature Distributions in Chemical Reactors
SENSORS
IF3.5

