.png){kind=icon}
返回
Developing a machine learning model for heat pipes considering different input features
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ijthermalsci.2024.109398.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Using heat pipes (HPs) is an effective method for heat dissipation to overcome the challenge about the rising power density of the permanent magnet synchronous motor (PMSM). Using machine learning models to evaluate the performance of HPs has attracted much attention. There are many key input features that can affect the performance of machine learning models, which impacts, whereas, have not been understood, and how to select such features still remains unclear. In this work, the impact of thirteen key input features is investigated by using the Shapely value. Results showed that, when only predicting the effective thermal conductivity (Keff), heat flux (Q), ratio of HP length to diameter (F), ratio of evaporator length to HP length (e), ratio of condenser length to HP length (c), ratio of HP length to cross area (I), effective length of HP (Leff), inclination angle (B), and Nusselt number (Nu) should be considered when using the Artificial Neural Network (ANN) model. Based on such input features, the mean absolute percentage error (MAPE) and coefficient of determination (R2) are 5.68 % and 0.9580, respectively. When predicting critical heat flux (Qcr) and (Keff), the model accuracy is lower, with 6.81 % of MAPE and 0.9377 of R2. The identified key input features can also provide insights on how to improve the HP design and how to renovate the development of physical models.
Keyword:
Motor cooling
Heat pipe
Performance modeling
Machine learning
期刊
IF:
5
论文数:
8.8K
被引数:
2.5W
机构
引用论文
Prediction of two-phase flow patterns in upward inclined pipes via deep learning基于深度学习的上倾管道两相流流型预测.png)
ENERGY
OAAI
ENERGYIF9.4
OAAI分享收藏Evaporation and condensation heat transfer in a heat pipe with a sintered-grooved composite wick带有烧结槽复合芯的热管中的蒸发和冷凝传热
PREAI
分享收藏分享收藏Advanced big-data/machine-learning techniques for optimization and performance enhancement of the heat pipe technology-A review and prospective studyAPPLIED ENERGYOAAI
APPLIED ENERGYIF11
OAAI分享收藏nRole of input features in developing data-driven models for building thermal demand forecast输入特征在开发用于建筑热需求预测的数据驱动模型中的作用ENERGY AND BUILDINGSOAAI
ENERGY AND BUILDINGSIF7.1
OAAI分享收藏
查看更多内容