.png){kind=icon}
返回
Developing a validated hydrocode model for adobe under impact loading
.png){kind=icon}
OA
AI
DOI：10.1016/j.ijimpeng.2017.01.019.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
We present hydrocode simulations of penetration and perforation of adobe targets by high-hardness spherical steel projectiles. For the description of adobe we employ the RHT concrete model, which describes strength and failure depending on pressure, Lode angle, and strain rate in combination with a porous equation of state. In order to apply this model to adobe we develop a parameter set partially based on material test data. Other parameters are obtained through engineering assumptions, and their importance is assessed by sensitivity analyses. Ballistic reference experiments are reproduced well by our simulations especially regarding residual velocities of projectiles perforating finite-thickness targets. Therein, we also properly capture the deformation of the projectile and the damage of the target. Simulations of the penetration into semi-infinite targets are in acceptable agreement with the ballistic data. However, a significant influence of target setup and boundary conditions on the resulting penetration depths is discovered. The residual velocities obtained by perforation simulations do not show such sensitivity but considerably depend on the yielding threshold of the projectile. Hence, the latter property of the projectile must be correctly included in the simulation in order to be able to draw conclusions on the ability of the material model and the model parameters to describe the target. As for other building and geological materials, the pore compaction is revealed to be an important form of energy dissipation also for adobe and is hence an essential ingredient for the description of the ballistic performance of this material. (C) 2017 Elsevier Ltd. All rights reserved.
Keyword:
Adobe
Constitutive model
Hydrocode simulation
Impact
RHT concrete model
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.7
论文数:
4.9K
被引数:
2.0W
机构
暂无机构信息
引用论文
.png){kind=icon}
Evaluation of typical concrete material models used in hydrocodes for high dynamic response simulations高动态响应模拟hydrocodes中使用的典型混凝土材料模型的评估
PREAI
分享收藏Adobe bricks under compression: Experimental investigation and derivation of stress-strain equation
PREAI
分享收藏分享收藏
查看更多内容