.png){kind=icon}
返回
Developing low-carbon high-strength core-shell aggregates using solid waste by cold-bonding techniques
.png){kind=icon}
PRE
AI
DOI：10.1016/j.conbuildmat.2024.135116.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Facing the challenges of natural aggregate sustainability and carbon neutrality, a novel low-carbon and highstrength core-shell aggregate (CSA) was developed in this study by cold-bonding with solid wastes. The developed CSA was characterized by crushing strength (CS), loose bulk density (LBD), water absorption (WA), and analyzed by hydration heat, pore properties, and then evaluated by carbon footprint assessment for comparing with the common artificial lightweight aggregates. The results showed that a water/binder ratio of 0.21 for the CSA production restricted the cement hydration, which provided a chance to reduce the cement usage by replacing it with GGBS and FA for low carbon purposes. Compared with FA, GGBS was more suitable for replacing cement in producing CSA because of its better micro-aggregate effect and secondary volcanic ash reaction for promoting hydration and optimizing pore structure. The pelletization CO2 emission (COE) for the CSA production only ranged from 4.2% to 11.9% of the total COE, which proved the green feature of cold-bonding in producing CSA. Replacing cement with 0-80% GGBS decreased the COE from 578.9 kg to 188.1 kg for 1 ton of CSA production. The CSA with 80% GGBS developed in this study attained CS of 7.68 MPa, LBD of 843 kg/m3, and WA of 17.8%, which showed much higher strength efficiency of 9110 Pa & sdot;m3/kg and much lower COE of 188.1 kgCO2 eq/t than the common artificial lightweight aggregates.
Keyword:
Artificial lightweight aggregate
Core-shell structure
Cold-bonding
Solid wastes
Carbon footprint assessment
Carbon neutrality
期刊
IF:
8
论文数:
4.5W
被引数:
27.9W
机构
引用论文
Valorization of concrete slurry waste (CSW) and fine incineration bottom ash (IBA) into cold bonded lightweight aggregates (CBLAs): Feasibility and influence of binder types将混凝土泥浆废物 (CSW) 和细焚烧底灰 (IBA) 转化为冷粘结轻骨料 (cbla) 的有效性: 粘合剂类型的可行性和影响
PREAI
分享收藏Recycling solid waste to produce eco-friendly ultra-high performance concrete: A review of durability, microstructure and environment characteristics回收固体废弃物生产环保型超高性能混凝土: 耐久性、微观结构和环境特性综述
PREAI
分享收藏La représentation obligatoire des actionnaires salariés au conseil d'administration : un état des lieux.png)
Gestion 2000
OAAI
Gestion 2000IF0
OAAI分享收藏
分享收藏分享收藏
查看更多内容