返回
Developing multi-layered 3D printed homogenized structure using solid state deposition method
DOI:10.1016/j.matchar.2023.112770.png)
摘要
En 中文
Multi-layered homogenized materials are promising candidates for practical applications in automotive manufacturing due to their excellent performance. Multi-layer metal deposition by fusion methods in additive manufacturing results in inhomogeneity in properties due to a higher thermal gradient across the layers during deposition. The present work explores a solid-state deposition method, namely, friction stir deposition, to develop a multi-layered 3D structure. The developed structure exhibited uniform thickness of each layer with no variation in chemical composition, microstructural features, and mechanical properties across the layers. It is proposed that, due to low rise in temperature and lower resultant thermal gradient during deposition, 3D structures with much better and uniform properties can be developed.
Keyword:
Multi -layer materials
Solid state deposition
Thermal gradient
Microstructure
Chemical composition
Mechanical property
期刊
IF:
5.5
论文数:
1.1W
被引数:
4.6W
机构
引用论文
Additive friction stir deposition of SS316: Effect of process parameters on microstructure evolution
Local microstructure evolution and mechanical performance of friction stir additive manufactured 2195 Al-Li alloy搅拌摩擦增材制造2195 al-li合金的局部组织演变及力学性能
Investigation on microstructural evolution and property variation along building direction in friction stir additive manufactured Al-Zn-Mg alloy搅拌摩擦增材制造al-zn-mg合金沿生成方向的组织演变及性能变化研究

