返回
Development of a REBa2Cu3O7-δ multi-core superconductor with 'inner split' technology
DOI:10.1088/0953-2048/29/4/045006.png)
摘要
En 中文
Recently, advanced research into fine filament technology for tape-shaped superconducting-coated conductors composed of REBa2Cu3O7-delta (RE123, RE: rare earth such as Gd or Y, 0 < delta < 1) has been carried out to improve performance in high magnetic fields by reducing the large diamagnetism of the RE123 superconducting layer. The major challenge for high-field NMR/MRI applications is to obtain high tensile stress tolerance above 500 MPa with a high critical current. In this study, a RE123 multi-core superconductor was fabricated via an 'inner split' method using a commercially available RE123 single-core coated conductor, where only the ceramics (RE123 and buffer layers) in wire are electrically separated to multi-filaments without superconducting current flow between the filaments. Experimental results show that wires having 2, 3, 4, or 5 cores have a high critical current (above 95% of the original) and maintain tensile stress tolerance above 650 MPa. The diamagnetism of the five-core wire is reduced similar to 85% of the original at 7 T. Thus, the wire was optimized via inner split method for high-field use.
Keyword:
RE123
multi-core
superconducting wire
inner split
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.2
论文数:
8.3K
被引数:
1.2W
机构
引用论文
Changes in the bending modulus of AOT based microemulsions induced by the incorporation of polymers in the water core
Soft Matter
IF0

