.png){kind=icon}
返回
Die Design Modification to Improve Workability during Equal Channel Angular Pressing
.png){kind=icon}
PRE
AI
DOI：10.1002/adem.201600110.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The effect of choked and relieved configurations of die exit channel on the workability of AA6063 alloy during equal channel angular pressing (ECAP) is investigated. Finite element simulation is used to predict variation in maximum principal stress (s1) to be consequently correlated to the occurrence of surface cracking. Critical regions for fracture are found at the top surface of the sample at which tensile s1 exists. Tensile stresses are involved when dies with parallel or relieved exit channels are used while the stresses are compressive in case of die with choked exit channel. Choke angle of 0.2 degrees is found as the optimum value guaranteeing compressive s1 in addition to avoiding significant increase in strain inhomogeneity and pressing pressure.
Keyword:
SEVERE PLASTIC-DEFORMATION
ULTRAFINE-GRAINED MATERIALS
AZ31 MAGNESIUM ALLOY
STRAIN-RATE
MICROSTRUCTURAL EVOLUTION
MECHANICAL-PROPERTIES
TENSILE PROPERTIES
ALUMINUM-ALLOY
PURE ALUMINUM
TEMPERATURE
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.3
论文数:
9.3K
被引数:
2.2W
机构
暂无机构信息
引用论文
分享收藏Natural polymer biocomposites produced from processing raw wood flour by severe shear deformation.png)
CARBOHYDRATE POLYMERS
CARBOHYDRATE POLYMERSIF12.5
PREAI
分享收藏Effect of equal channel angular pressing on tensile properties and fracture modes of casting Al-Cu alloysMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
PREAI
分享收藏
Equal channel angular extrusion: from macromechanics to structure formationMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
PREAI
分享收藏Nanostructuring of metals by severe plastic deformation for advanced propertiesNATURE MATERIALS
NATURE MATERIALSIF38.5
PREAI
分享收藏Nano- and micro-scale free volume in ultrafine grained Cu-1 wt.%Pb alloy deformed by equal channel angular pressingACTA MATERIALIA
ACTA MATERIALIAIF9.3
PREAI
分享收藏Feasibility of attaining uniform grain structure and enhanced ductility in aluminum alloy by employing a beveled punch in equal-channel angular pressingMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
PREAI
分享收藏
查看更多内容