.png){kind=icon}
返回
Diffractive multi-beam surface micro-processing using 10 ps laser pulses
.png){kind=icon}
PRE
AI
DOI：10.1016/j.apsusc.2009.06.089.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A high repetition rate picosecond laser system is combined with a spatial light modulator (SLM) for diffractive multiple beam processing. The effect of the zero order beam is eliminated by adding a Fresnel zone lens (FZL) to defocus the un-diffracted beam at the processing plane. Chromatic dispersion, which is evident with a large bandwidth femtosecond pulses leading to the problem of distorted hole shape is eliminated due to the much narrower spectral bandwidth, similar to 0.1 nm at 10 ps pulselength, resulting in highly uniform intensity spots, independent of diffraction angle. In addition, high-throughput processing is demonstrated by combining the high power laser output, 2.5 W at lambda approximate to 1064 nm and fast repetition rate, f approximate to 20 kHz with P > 1.2 W diffracted into 25 parallel beams. This has the effect of creating an effective'' repetition rate of 500 kHz without restrictive scan speeds. (C) 2009 Elsevier B.V. All rights reserved.
Keyword:
Picosecond laser
Spatial light modulator (SLM)
Computer generated holograms (CGH)
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.9
论文数:
6.2W
被引数:
19.4W
机构
引用论文
.png){kind=icon}
分享收藏
Branching Regulation in Olefin Polymerization via Lewis Acid Triggered Isomerization of Monomers
PREAI
分享收藏Comparative investigation of solar cell thin film processing using nanosecond and femtosecond lasers
PREAI
分享收藏
查看更多内容