.png){kind=icon}
返回
Diffusion bonding of AZ91 using a silver interlayer
.png){kind=icon}
OA
AI
DOI：10.1016/j.matdes.2008.04.003.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Diffusion bonding of AZ91 alloy with a silver interlayer was carried out at 480 degrees C for different times under 1 MPa in a vacuum of 2 x 10(-3) Pa. Shear test was applied to measure the shear strengths of the joints in the room temperature. The shear strength values of all bonded samples were found around 65-70 MPa. SEM-EDS studies indicated that the melting occurred along the interface of bonded samples as a result of transfer of atoms between the interlayer and the matrix during bonding. XRD results confirmed that the interlayer dissolved in the interface of joints. Investigations of the fracture surfaces showed that a good bonding was obtained by plastic deformation. (C) 2008 Elsevier Ltd. All rights reserved.
Keyword:
non-ferrous metals and alloys
bonding
scanning electron microscopy
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
M
IF:
7.9
论文数:
1.9W
被引数:
9.8W
机构
引用论文
Transient liquid phase bonding of magnesium alloy (Mg-3Al-lZn) using aluminium interlayer使用铝中间层的镁合金 (Mg-3Al-lZn) 的瞬态液相连接.png)
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
PREAI
分享收藏Combining multipopulation evolutionary algorithms with memory for dynamic optimization problems
PREAI
分享收藏Diffusion bonding in superplastic magnesium alloysMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
PREAI
分享收藏分享收藏Solid-state diffusion bonding of gamma-TiAl alloys using Ti/Al thin films as interlayersINTERMETALLICS
OAAI
INTERMETALLICSIF4.8
OAAI分享收藏Effect of the eutectic phase mixture on the anodic behavior of alloy AZ91MATERIALS & DESIGN
MATERIALS & DESIGNIF7.9
PREAI
分享收藏
查看更多内容