.png){kind=icon}
返回
Direct inductive sensor-to-microcontroller interface circuit
.png){kind=icon}
OA
AI
DOI：10.1016/j.sna.2015.01.017.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This paper proposes and analyses a microcontroller-based interface circuit for inductive sensors with a variable self-inductance. Besides the microcontroller (mu C) and the sensor, the circuit just requires an external resistor and a reference inductor so that two RL circuits are formed. The mu C appropriately excites such RL circuits in order to measure the discharging time of the voltage across each inductor (i.e. sensing and reference) and then it uses such discharging times to estimate the sensor inductance. Experimental tests using different commercial mu Cs at different clock frequencies show the limitations (especially, due to parasitic resistances and quantisation) and the performance of the proposed circuit when measuring inductances in the millihenry range. A non-linearity error lower than 0.3% full-scale span (FSS) and a resolution of 10 bits are achieved, which are remarkable values considering the simplicity of the circuit. (C) 2015 Elsevier B.V. All rights reserved.
Keyword:
Inductive sensor
Microcontroller
Sensor electronic interface
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.9
论文数:
1.5W
被引数:
3.3W
机构
引用论文
.png){kind=icon}
Interfacing Differential Capacitive Sensors to Microcontrollers: A Direct Approach将差分电容传感器连接到微控制器: 直接方法
PREAI
分享收藏
查看更多内容