.png){kind=icon}
返回
Dynamic tests on bituminous layers interface
.png){kind=icon}
PRE
AI
DOI：10.1617/s11527-015-0548-z.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The most common test used to evaluate the interface bond strength of asphalt pavements is the guillotine direct shear test working in monotonic modality. Under this test configuration the specimen reaches failure in a mode very different from those activated in an actual pavement. In fact, the repetitive loading applied by vehicles is considerably lower than the interface resistance measured by a monotonic test. Moreover, the stress paths imposed to the specimen nowhere are experienced on field, in terms of ratio between shear and normal stresses and their variation during loading time. This study regards the dynamic performance of double-layered cylindrical specimens evaluated by a shear tester where the specimen is inclined so as to obtain contemporarily variations of the applied normal and shear stresses. Various inclinations are used to reproduce several combinations of these two stress components as they actually occur on field in those positions where the vehicle wheels generate a shear stress always in the same direction and proportional to the normal stress. As both normal and shear components influence the interface resistance to repetitive stress, a dynamic failure surface is assessed in the three-dimension space, with the two stress components as independent variables and the number of cycles at failure as dependent variable.
Keyword:
Pavement durability
Tack coat
Bonding failure
Interface shear test
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
M
IF:
3.9
论文数:
4.4K
被引数:
1.9W
机构
引用论文
.png){kind=icon}
分享收藏Nanoscale plasmonic coupler with tunable direction and intensity ratio controlled by optical vortex
PREAI
分享收藏Interlayer bonding of binder, base and subbase layers of asphalt pavements: Long-term performance沥青路面结合料、基层和底基层的层间粘结: 长期性能
PREAI
分享收藏分享收藏
查看更多内容