.png){kind=icon}
返回
Dynamically programable real-time controller for a 2D scanning fibre microscope
.png){kind=icon}
OA
AI
DOI：10.1364/OE.544137.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A programmable controller for a 2D Lissajous scanning fibre microscope is described. Source motion is based on a vibrating cantilever formed by dip-coating two cylindrical silica fibres. Orthogonal modes are excited by a piezoelectric actuator oriented at 45 degrees to the principal axes. Back-scattered signals are detected using a mode-stripping photodiode to collect cladding modes in a dual numerical aperture confocal scheme. Optical feedback is generated by a shaped reflecting aperture with amplitude-coded reflectivity. Electrical pulses from the detector are separated into low- and high-mode feedback signals using window detectors. The low mode is excited at resonance using a phase-locked loop (PLL) containing a voltage-controlled oscillator (VCO). The high mode is driven off-resonance at a frequency derived from computer control of a second VCO. Amplitudes are corrected, and common frequency signals derived from the two motions using divide-by-N circuits are synchronised using additional PLLs. Programmable generation of Lissajous figures and imaging with dynamically variable scan density are demonstrated.
Keyword:
WIDE-FIELD
ENDOSCOPE
OPERATION
DESIGN
期刊
IF:
3.3
论文数:
6.1W
被引数:
14.3W
机构
引用论文
Scanning fiber microdisplay: design, implementation, and comparison to MEMS mirror-based scanning displays.png)
OPTICS EXPRESS
OAAI
OPTICS EXPRESSIF3.3
OAAI分享收藏Spiral scanning fiber-optic two-photon endomicroscopy with a double-cladding antiresonant fiberOPTICS EXPRESSOAAI
OPTICS EXPRESSIF3.3
OAAI分享收藏Scanning and Actuation Techniques for Cantilever-Based Fiber Optic Endoscopic Scanners-A ReviewSENSORSOAAI
SENSORSIF3.5
OAAI分享收藏Nationalism and heroism with Chinese characteristics: a critical discourse analysis of
Wolf Warrior IIContinuum
ContinuumIF0
PREAI
分享收藏
查看更多内容