.png){kind=icon}
返回
Edge-based modulation transfer function measurement method using a variable oversampling ratio
.png){kind=icon}
OA
AI
DOI：10.1364/OE.435981.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The ISO 12233 edge-based method approximates the modulation transfer function (MTF) as a function of horizontal or vertical spatial frequency by analyzing a 1D supersampled edge gradient obtained from the captured image of a near-vertical or near-horizontal bi-tonal edge, respectively. The method involves the slanted projection of pixels in a square array into a linear array of subpixel-wide bins. It can be modified to accommodate diagonal MTF measurements; however, using a fixed integer oversampling ratio degrades the accuracy and precision of diagonal MTF estimates due to periodic misalignment between the projection paths and the bin array. In this study, an edge-based method-called OMNI-sine-is proposed to counter the misalignment and improve MTF estimates by using a variable oversampling ratio dependent on the slant angle. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
期刊
IF:
3.3
论文数:
6.1W
被引数:
14.3W
机构
引用论文
Measuring positive health: Concurrent and factorial validity based on a representative Dutch sample
OAAI
OAAI分享收藏Modified slanted-edge method and multidirectional modulation transfer function estimation.png)
OPTICS EXPRESSOAAI
OPTICS EXPRESSIF3.3
OAAI分享收藏
查看更多内容