返回
Electrochemical decrease of sulfide in sewage by pulsed power supply
DOI:10.1016/j.jelechem.2015.02.014.png)
摘要
En 中文
Pulsed electrochemical process was explored to remove sulfide in municipal sewage, which successfully achieved higher removal rate of 93.2% compared with 73.2% by direct current (DC) power supply. The sulfur content on the electrode was 0.21% by pulsed electrochemical process compared with that of 1.05% on anode by DC electrochemical process, indicating that pulsed electrochemical process can inhibit anodic passivation resulting from sulfur deposition compared with DC electrochemical process. Besides, the electrode scaling can also be effectively controlled during pulsed electrochemical process. Moreover, the process optimization was investigated for pulsed electrochemical treatment, which obtained the highest removal rate of 97.8% at pH 7-8, cell voltage of 7 V, duty cycle of 60%, pulse frequency at 1000 Hz and electrode spacing of 2.5-3.0 cm. These results indicate that pulsed electrochemical process is a promising method of efficient and sustainable electrochemical sulfide removal from sewage. (C) 2015 Elsevier B.V. All rights reserved.
Keyword:
Sulfide removal
Pulsed electrochemical process
Sewage
Sulfur deposition
Anodic passivation
Cathodic scaling
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.1
论文数:
1.7W
被引数:
4.0W
机构
暂无机构信息
引用论文
Continuous-wave Infrared Subsurface Optical Stimulation of the Rat Prostate Cavernous Nerves Using a 1490-nm Diode Laser
Urology
IF0
Chemical and biological technologies for hydrogen sulfide emission control in sewer systems: A review用于控制下水道系统中硫化氢排放的化学和生物技术: 综述
WATER RESEARCH
IF12.4
Electrochemical oxidation of phenol at boron-doped diamond electrode in pulse current mode脉冲电流模式下含硼金刚石电极上苯酚的电化学氧化
ELECTROCHIMICA ACTA
IF5.6

