arrow
返回

Electrochemically driven multi-material 3D-printing

delete2020-03-01
delete26
PRE
AI
A
Adriano Ambrosi
R
Richard D. Webster
M
Martin Pumera *
DOI:10.1016/j.apmt.2019.100530delete
delete原文链接
delete分享
delete收藏
摘要

摘要

En 中文
Major efforts for the advancement of additive manufacturing are lately focused on the development of multi-material 3D-printing (mMat-3DP) methods which can enable the fabrication of complete devices in a single printing process combining materials with different properties (structural, functional, conductive, etc.). Printing conductive (metal and non-metal) materials with low-energy-consuming and economical methods is of particular interest since it would facilitate the production of electrodes, catalytic surfaces and electronic circuitry in general for countless applications. In order to contribute to the future vision of mMat-3DP, we wish to show here an economical method to selectively deposit different conductive materials (metal and conductive polymer) by means of electrochemical driving forces. A custom-made electrochemical liquid dispenser with embedded electrodes is used to electrodeposit selectively a metal (Cu), a conductive polymer (polyaniline), or a combination of the two, with both precursors present simultaneously and conveniently in the common electrolytic bath. Combining the 3D-patterning ability of a desktop 3D-printer with a concurrent control of the electrochemical process, selective deposition is demonstrated over a conductive graphite foil used as the cathode. Printing and electrochemical parameters have been optimized using scanning electron microscopy and energy dispersive X-ray spectroscopy to characterize the printed structures. The electrochemical 3D-printing method, being inherently low-cost, scalable and compatible with electrode fabrication methods shall find a broad scope of applications. (C) 2019 Published by Elsevier Ltd.
Keyword:
3D-printing
Additive manufacturing
Electrochemistry
Metal printing
Conductive polymer printing
Multimaterial 3D-printing
AI总结

AI总结

对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。

期刊

Applied Materials Today 封面图
Applied Materials Today
IF:
6.9
论文数:
3.5K
被引数:
1.8W

机构

南
南洋理工大学
学者数:
4.3K
论文数: 2.0K
被引数: 5.3W
B
Brno University of Technology
学者数:
302
论文数: 116
被引数: 2.4K
引用论文

引用论文

Multi-metal 4D printing with a desktop electrochemical 3D printer使用台式电化学3D打印机进行多金属4D打印
err2019-03-08
err75
errOAAI
errChen, Xiaolong; Liu, Xinhua; Ouyang, Mengzheng; Chen, Jingyi; Taiwo, Oluwadamilola; Xia, Yuhua; Childs, Peter R. N.; Brandon, Nigel P.; Wu, Billy
err分享
err收藏
Direct printing of nanostructures by electrostatic autofocussing of ink nanodroplets
err2012-06-12
err379
errOAAI
errGalliker, P.; Schneider, J.; Eghlidi, H.; Kress, S.; Sandoghdar, V.; Poulikakos, D.
err分享
err收藏
err分享
err收藏
Chemistry of solid metal-based inks and pastes for printed electronics - A review
err2019-06-01
err102
PREAI
errCano-Raya, Clara; Denchev, Zlatan Z.; Cruz, Silvia F.; Viana, Julio C.
err分享
err收藏
学者 查看更多内容