返回
Embedded Position Detecting Method for Permanent Magnet Linear Motor Systems
DOI:10.1109/TIM.2021.3117057.png)
摘要
En 中文
An embedded position detecting method for permanent magnet linear motors (PMLMs) was proposed. The pair of magnetoresistance sensors was employed as a position detector for sensing the periodical magnetic induction intensity from built-in permanent magnets. A composited traveling wave signal, whose phase shift was proportional to the measured displacement, was produced by adding two induced standing wave signals. The series of clock pulses with equal spatial equivalent were employed to dynamically interpolate the phase difference between the reference signal and the traveling wave signal. Differing from the arctangent calculation for sine and cosine signals of traditional displacement sensors, the proposed embedded position detecting method could reach dynamically high resolution using the interpolation technique. Furthermore, sensing parameters were optimized to obtain much finer induced displacement signals, and the error analysis was discussed. The experimental results prove that after the error correction, the measuring accuracy reached -49.8 to 43.8 mu m within the traveling range of 120 mm, and the resolution reached 0.15 mu m. Compared with some traditional displacement sensors and various sensorless methods, the proposed embedded position detecting method had simple implementation and reasonable accuracy with the most cost-effective hardware, which had shown a significant promise in PMLMs.
Keyword:
Embedded position detection
magnetoresistance sensor
parameter optimization
permanent magnet linear motor (PMLM)
sensorless methods
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.9
论文数:
2.0W
被引数:
5.8W
机构
引用论文
Sensing Mechanism and Error Analysis of a Capacitive Long-Range Displacement Nanometer Sensor Based on Time Grating
IEEE SENSORS JOURNAL
IF4.5

