.png){kind=icon}
返回
Embedded sensitivity functions for characterizing structural damage
.png){kind=icon}
PRE
AI
DOI：10.1088/0964-1726/14/1/015.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The use of embedded sensitivities in vibration-based damage identification for structural health monitoring is discussed. Embedded sensitivity functions are algebraic combinations of measured frequency response function data that determine how the forced responses of structural systems change with perturbations in mass, damping, or stiffness. After the theory of embedded sensitivity functions is reviewed, they are applied to characterize damage in an analytical three-degree-of-freedom system, a bench top two-degree-of-freedom system, and a full-scale exhaust system. By comparing embedded sensitivity functions with finite difference functions using undamaged and damaged frequency response functions, damage is shown to be properly detected, located, and quantified in theory and practice assuming that structures are only damaged in one location. Demonstrations on the bench top system and exhaust system indicate that the technique is most effective when certain frequency ranges in the data are analyzed to avoid ranges of low signal-to-noise ratios and when changes to frequency response functions are not excessive to avoid distortions in the estimated perturbations.
Keyword:
HYBRID EXPANSION METHOD
FREQUENCY RESPONSES
SYSTEMS
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.8
论文数:
8.5K
被引数:
2.5W
机构
暂无机构信息
引用论文
.png){kind=icon}
Manipulation of ellipsoidal nanoparticles considering roughness based on atomic force microscopy
PREAI
分享收藏Hybrid expansion method for frequency responses and their sensitivities, Part I: Undamped systems
PREAI
分享收藏 没有更多内容
没有更多内容