.png){kind=icon}
返回
Evolutionary programming method for modeling the EDM parameters for roughness
.png){kind=icon}
PRE
AI
DOI：10.1016/j.jmatprotec.2007.09.022.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The method of electrical discharge machining (EDM), one of the processing methods based on non-traditional manufacturing procedures, is gaining increased popularity, since it does not require cutting tools and allows machining involving hard, brittle, thin and complex geometry. By using different EDM parameters (current, pulse on-time, pulse off-time, arc voltage), the R. (mu m) roughness value as a result of application of a number of copper electrode-hardened powder metals (cold work tool steel) to a work piece has been investigated, in this study. At the same time, roughness values obtained from the experiments that have been modeled by using the genetic expression programming (GEP) method and a mathematical relationship has been suggested between the GEP model and surface roughness and parameters affecting it. Moreover, EDM has been used by applying copper, copper-tungsten (W-Cu) and graphite electrodes to the same material with experimental parameters designed in accordance with the Taguchi method. Results obtained from this study have been compared among each other and similar studies in the literature. (c) 2007 Published by Elsevier B.V.
Keyword:
electrical discharge machining
genetic expression programming
surface roughness
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
J
IF:
7.5
论文数:
1.6W
被引数:
4.5W
机构
引用论文
Milling surface roughness prediction using evolutionary programming methods.png)
MATERIALS & DESIGN
MATERIALS & DESIGNIF7.9
PREAI
分享收藏Predictions on surface finish in electrical discharge machining based upon neural network models
PREAI
分享收藏Material removal rate and electrode wear study on the EDM of silicon carbide碳化硅电火花加工的材料去除率和电极磨损研究
PREAI
分享收藏Influence of silicon powder-mixed dielectric on conventional electrical discharge machining硅粉混合介质对常规电火花加工的影响
PREAI
分享收藏Effect of electrical discharge machining on surface characteristics and machining damage of AISI D2 tool steelMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
PREAI
分享收藏The study of high efficiency and intelligent optimization system in EDM sinking processl电火花加工工艺高效智能优化系统的研究
PREAI
分享收藏
查看更多内容