.png){kind=icon}
返回
Experimental Validation of a Data-Driven Step Input Estimation Method for Dynamic Measurements
.png){kind=icon}
OA
AI
DOI：10.1109/TIM.2019.2951865.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Simultaneous fast and accurate measurement is still a challenging and active problem in metrology. A sensor is a dynamic system that produces a transient response. For fast measurements, the unknown input needs to be estimated using the sensor transient response. When a model of the sensor exists, standard compensation filter methods can be used to estimate the input. If a model is not available, either an adaptive filter is used or a sensor model is identified before the input estimation. Recently, a signal processing method was proposed to avoid the identification stage and estimate directly the value of a step input from the sensor response. This data-driven step input estimation method requires only the order of the sensor dynamics and the sensor static gain. To validate the data-driven step input estimation method, in this article, the uncertainty of the input estimate is studied and illustrated on simulation and real-life weighing measurements. It was found that the predicted mean-squared error of the input estimate is close to an approximate Cramer-Rao lower bound for biased estimators.
Keyword:
Estimation
Uncertainty
Transient response
Statistical analysis
Noise measurement
Signal processing
Velocity measurement
Cramer-Rao lower bound (CRB)
data-driven signal processing method
dynamic measurement
metrology
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.9
论文数:
2.0W
被引数:
5.8W
机构
引用论文
.png){kind=icon}
查看更多内容