.png){kind=icon}
返回
Fail-safe topology optimization for multiscale structures
.png){kind=icon}
PRE
AI
DOI：10.1016/j.compstruc.2023.107069.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This paper presents a novel fail-safe topology optimization method for multiscale structures. The partial damage of both macroscopic and microscopic scales is considered for structural design. To ensure precision, the effective elasticity tensor obtained by the homogenization method is fitted as a high-order polynomial function. Meanwhile, the simplified models of partially damaged truss-like microstructure are employed to reduce the computational cost and the difficulty of fitting. Moreover, Heaviside projection is applied to speed up the convergence and yield a relatively clear configuration. Three numerical examples are tested to demonstrate that the optimized multiscale structures successfully obtain comprehensive performances than optimized solid structures when appropriate microstructure configurations are chosen. Besides, multiscale structures are more self-supporting than solid structures and thus more suitable for additive manufacturing due to the large number of gray elements diffused.(c) 2023 Elsevier Ltd. All rights reserved.
Keyword:
Fail-safe topology optimization
Multiscale structures
Partial damage
Homogenization method
Heaviside projection
期刊
C
IF:
4.8
论文数:
6.2K
被引数:
1.7W
机构
引用论文
Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures用于增材制造的最佳拓扑: 一种用于实现无支撑最佳结构的增材制造的方法.png)
MATERIALS & DESIGN
MATERIALS & DESIGNIF7.9
PREAI
分享收藏
分享收藏Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design考虑悬垂约束的拓扑优化: 通过设计消除增材制造中的牺牲支撑材料
PREAI
分享收藏
查看更多内容