.png){kind=icon}
返回
Fast Indirect Model Predictive Control for Variable Speed Drives
.png){kind=icon}
PRE
AI
DOI：10.1109/TPEL.2023.3307773.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This article focuses on indirect model predictive control (MPC) for variable speed drives, such as induction and synchronous machine drives. The optimization problem underlying indirect MPC is typically written as a standard constrained quadratic programming (QP) problem, which requires a QP solver to find the optimal solution. Although many mature QP solvers exist, solving the QP problems in industrial real-time embedded systems in a matter of a few tens of microseconds remains challenging. Instead of using the complex general-purpose QP solvers, this article proposes a geometrical method for isotropic machine drives and an analytical method for anisotropic machine drives to find the optimal output voltage. This is done by examining and subsequently exploiting the geometry of the associated optimization problems. Both methods are simple, and easy to implement on industrial control platforms. The effectiveness of the proposed geometrical and analytical methods is demonstrated by experimental results for an induction machine drive and an interior permanent-magnet synchronous machine drive, respectively.
Keyword:
Optimization
Stators
Rotors
Modulation
Synchronous machines
Switches
Induction machines
Induction machine (IM)
interior permanent-magnet synchronous machine (IPMSM)
model predictive control (MPC)
quadratic programming (QP)
期刊
IF:
6.5
论文数:
1.7W
被引数:
8.3W
机构
引用论文
Fast Solver for Implicit Continuous Set Model Predictive Control of Electric Drives电力传动隐式连续集模型预测控制的快速求解器.png)
IEEE ACCESS
OAAI
IEEE ACCESSIF3.6
OAAI分享收藏
分享收藏Model Predictive Control-A Simple and Powerful Method to Control Power Converters模型预测控制-一种简单而强大的控制功率转换器的方法
PREAI
分享收藏分享收藏
查看更多内容