.png){kind=icon}
返回
Fault Detection and Localization Method for Modular Multilevel Converters
.png){kind=icon}
PRE
AI
DOI：10.1109/TPEL.2014.2348194.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The modular multilevel converter (MMC) is attractive for medium-or high-power applications because of the advantages of its high modularity, availability, and high power quality. However, reliability is one of the most important issues for MMCs which are made of large number of power electronic submodules (SMs). This paper proposed an effective fault detection and localization method for MMCs. An MMC fault can be detected by comparing the measured state variables and the estimated state variables with a Kalman filter. The fault localization is based on the failure characteristics of the SM in the MMC. The proposed method can be implemented with less computational intensity and complexity, even in case that multiple SM faults occur in a short time interval. The proposed method is not only implemented in simulations with professional tool PSCAD/EMTDC, but also verified with a down-scale MMC prototype controlled by a real-time digital signal controller in the laboratory. The results confirm the effectiveness of the proposed method.
Keyword:
Fault detection
fault localization
Kalman filter
modular multilevel converters
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.5
论文数:
1.7W
被引数:
8.3W
机构
引用论文
.png){kind=icon}
分享收藏An online framework for state of charge determination of battery systems using combined system identification approach使用组合系统识别方法确定电池系统荷电状态的在线框架
PREAI
分享收藏Classification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC)
PREAI
分享收藏
查看更多内容