返回
Feed-forward active operation optimization for CCHP system considering thermal load forecasting
DOI:10.1016/j.energy.2022.124234.png)
摘要
En 中文
Using simulated load obtained by energy consumption simulation software is a feasible way to optimize operation of combined cooling heating and power (CCHP) system. However, due to attenuation and delay of thermal energy on transmission, there may be a mismatch between real demand and supplied energy. To obtain more accurate assessment of supplied energy, this paper analyzes characteristics of thermal load through correlation analysis and principal component analysis. Then, the model of thermal load forecasting considering attenuation and delay on transmission is constructed and a case study with actual monitored data in an energy system is employed. Finally, a method of feed-forward active operation optimization for CCHP system is put forward. Based on forecasted thermal load on weekday and weekend in heating, transition and cooling season, dynamic matching optimization and evaluation were carried out. Results show that mean absolute percentage error are 5.43% for heating load forecasting and 6.84% for cooling load forecasting, respectively. The performances of CCHP system are better than that of separate system based on the forecasted thermal load and the maximum integrated performance index is 68.81%, obtained at weekend in cooling season. (C) 2022 Elsevier Ltd. All rights reserved.
Keyword:
CCHP system
Load forecasting
Operation optimization
Integrated performance
期刊
IF:
9.4
论文数:
4.3W
被引数:
20.2W
机构
引用论文
Influence analysis of energy policies on comprehensive performance of CCHP system in different buildings
ENERGY
IF9.4
Effects of load following operational strategy on CCHP system with an auxiliary ground source heat pump considering carbon tax and electricity feed in tariff
APPLIED ENERGY
IF11
Multi-objective optimal operation and energy coupling analysis of combined cooling and heating system
ENERGY
IF9.4

