arrow
返回

Flow correction control with electromagnetically induced preform resting process

delete2019-05-28
delete4
PRE
AI
M
Mohsen Poorzeinolabedin *
L
Levend Parnas
DOI:10.1007/s40436-019-00257-2delete
delete原文链接
delete原文求助
delete分享
delete收藏
摘要

摘要

En 中文
Resin flow correction control with electromagnetic field source, a new variation of the vacuum-assisted resin transfer molding (VARTM) process called electromagnetically induced preform resting (EIPR) for dynamical resin flow controlling is introduced to manipulate the flow front and local permeability to prevent the formation of dry spots. This paper proposes an active and real-time flow control approach that is implemented during the composite laminate infusion. The EIPR process applies an electromagnetic field source to pinch (raise) and vibrate the upper flexible mold to rest the fiber preform and increase the local permeability. Vibration action delivers the fluid through the preform. The EIPR process includes a new and creative upper flexible vacuum bag with embedded elements to lift and create local vibrations via an automated gantry system. The control methodology is performed by tracking the flow front with a real-time correction. System capability is demonstrated with three configurations of preform of different preform permeabilities in each experiment. A low permeability preform is employed in these configurations to disturb the flow pattern and cause an artificial problem or pseudo problem during the filling process. The results indicate that this system fills the mold completely and reduces the filling time without any dry spots and therefore creates no waste material.
Keyword:
Resin flow
Process monitoring
On-line flow control
Vacuum-assisted resin transfer molding (VARTM)
AI总结

AI总结

对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。

期刊

Advances in Manufacturing 封面图
Advances in Manufacturing
IF:
3.8
论文数:
605
被引数:
1.9K

机构

T
TED University
学者数:
214
论文数: 286
被引数: 210
M
Middle East Technical University
学者数:
7.4K
论文数: 6.7K
被引数: 6.3K
引用论文

引用论文

Resin infusion under flexible tooling process and structural design optimization of the complex composite part
err2014-12-01
err20
PREAI
errPoorzeinolabedin, Mohsen; Parnas, Levend; Dashatan, Saeid Hosseinpour
err分享
err收藏
Supplementary Light on the Development of Lettuce and Cauliflower Seedlings补充光照对生菜和花椰菜幼苗发育的影响
err2024-01-10
err0
errOAAI
errAdilson Antonio Rizzon; Wendel Paulo Silvestre; Camila Bonatto Vicenço; Luciana Duarte Rota; Gabriel Fernandes Pauletti
err分享
err收藏
Active control of the vacuum infusion process
err2007-05-01
err66
PREAI
errModi, Dhiren; Correia, Nuno; Johnson, Michael; Long, Andrew; Rudd, Christopher; Robitaille, Francois
err分享
err收藏
err分享
err收藏
Sound absorption performance of light-frame timber construction wall based on Helmholtz resonator
err2022-03-23
err0
errOAAI
errYuhao Zhou; Si Chen; Haiyan Fu; Sarah Mohrmann; Zheng Wang
err分享
err收藏
学者 查看更多内容