Force Sensor Characterization Under Sinusoidal Excitations

Nieves Medina

doi:10.3390/s141018454

Force Sensor Characterization Under Sinusoidal Excitations

2014-10-06

10

OA

AI

DOI：10.3390/s141018454

原文链接

查看原文

摘要

En 中文

The aim in the current work is the development of a method to characterize force sensors under sinusoidal excitations using a primary standard as the source of traceability. During this work the influence factors have been studied and a method to minimise their contributions, as well as the corrections to be performed under dynamic conditions have been established. These results will allow the realization of an adequate characterization of force sensors under sinusoidal excitations, which will be essential for its further proper use under dynamic conditions. The traceability of the sensor characterization is based in the direct definition of force as mass multiplied by acceleration. To do so, the sensor is loaded with different calibrated loads and is maintained under different sinusoidal accelerations by means of a vibration shaker system that is able to generate accelerations up to 100 m/s(2) with frequencies from 5 Hz up to 2400 Hz. The acceleration is measured by means of a laser vibrometer with traceability to the units of time and length. A multiple channel data acquisition system is also required to simultaneously acquire the electrical output signals of the involved instrument in real time.

Keyword:

dynamic force

dynamic calibration

force standard

sinusoidal excitation

rocking motion

Force Sensor Characterization Under Sinusoidal Excitations

摘要

AI总结

期刊

机构

引用论文