.png){kind=icon}
返回
Free-form surface form error evaluation based on smaller-scale sampling points in touch-trigger probing
.png){kind=icon}
PRE
AI
DOI：10.1016/j.precisioneng.2022.03.019.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Surface reconstruction is an essential operation in the evaluation of free-form surface form error. As a feasible technology in free-form surface sampling, touch-trigger probing has been widely used in on-machine measurement and coordinate measurement machine. However, surface reconstruction quality is influenced by limited sampling point size. This study proposes a surface reconstruction method based on surface position error and deformation error model. Surface form error is decomposed into surface position error and deformation error. Then, the design surface is taken as a rigid body, and a point-to-surface function-based iterative algorithm is conducted to adjust surface location and orientation to best match the sampling points. The advantage of this algorithm is that it considers the probe dimension, so further compensation of probe radius is not required. The geometry of the adjusted design surface is modified based on thin plate energy minimization and point-to-surface function. Due to the inherent feature of the proposed method, geometric features of the design surface are kept. Experiments are conducted to verify the effectiveness of the proposed method, and results show that the proposed method can achieve lower error compared with existing methods.
Keyword:
Free-form surface
Form error
Surface position
Surface deformation
Touch trigger probing
期刊
机构
引用论文
Adaptive machining for curved contour on deformed large skin based on on-machine measurement and isometric mapping基于在机测量和等距映射的变形大蒙皮曲线轮廓自适应加工
PREAI
分享收藏Deviation model based method of planning accuracy inspection of free-form surfaces using CMMs基于偏差模型的cmm自由曲面规划精度检测方法.png)
MEASUREMENT
MEASUREMENTIF5.6
PREAI
分享收藏
Adaptive sampling point planning for free-form surface inspection under multi-geometric constraints
PREAI
分享收藏Compensation of deformation errors in five-axis flank milling of thin-walled parts via tool path optimization通过刀具路径优化补偿薄壁零件的五轴侧铣中的变形误差
PREAI
分享收藏
查看更多内容