.png){kind=icon}
返回
Functional multilayer solid electrolyte films for lithium dendrite suppression
.png){kind=icon}
PRE
AI
DOI：10.1063/5.0122984.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The improvement of the interface between a lithium metal and a solid electrolyte layer is very important for the application of a lithium anode coated by solid electrolytes in lithium metal batteries. In order to address the issues of interface performance and compatibility between solid electrolyte films prepared by magnetron sputtering and lithium metals and the suppression of lithium dendrite during the cycling, a three-layer interface solid electrolyte film based on carbon-doped lithium phosphate oxynitride (LiCPON) was employed for coating a lithium metal. The sandwich structure of LiCPON by introducing an ultra-thin lithium niobium oxynitride (LiNbON) layer prepared by sputtering LiNbO3 in nitrogen ambient can be confirmed by time-of-flight secondary ion mass spectrometry. Atomic force microscopy data indicated that the surface of the LiCPON thin film with the sandwich structure is flatter and smoother than that of the LiCPON thin film on the lithium metal. The interface impedance of the symmetric battery based on the sandwich structure of the LiCPON coating lithium metal was reduced from 512.2 to 65.4 omega, and the symmetric battery stable cycles from 300 h with an overpotential of more than 200 mV to 400 h with low overpotential of about 77 mV. These results suggest that functional multilayer solid electrolyte films become an effective method for protecting lithium. The incorporation of ultra-thin LiNbON into the LiCPON thin film could significantly decrease interface impedance between the lithium metal and solid electrolyte layer. Published under an exclusive license by AIP Publishing.
Keyword:
PHOSPHORUS OXYNITRIDE
LI METAL
ANODES
期刊
IF:
3.6
论文数:
10.4W
被引数:
17.8W
机构
引用论文
Mixed Ionic and Electronic Conductor for Li-Metal Anode Protection用于锂金属阳极保护的混合离子和电子导体.png)
ADVANCED MATERIALS
ADVANCED MATERIALSIF26.8
PREAI
分享收藏Electrochemical impedance study on the low temperature of Li-ion batteries锂离子电池低温电化学阻抗研究ELECTROCHIMICA ACTA
ELECTROCHIMICA ACTAIF5.6
PREAI
分享收藏Formation of a Stable Solid-Electrolyte Interphase at Metallic Lithium Anodes Induced by LiNbO3 Protective Layers在LiNbO3保护层诱导的金属锂阳极上形成稳定的固体电解质界面
OAAI
OAAI分享收藏Robustness-Heterogeneity-Induced Ultrathin 2D Structure in Li Plating for Highly Reversible Li-Metal Batteries高可逆锂金属电池镀锂中的鲁棒性-异质性诱导的超薄2D结构
PREAI
分享收藏Reviving the lithium metal anode for high-energy batteries复兴高能电池的锂金属阳极NATURE NANOTECHNOLOGY
NATURE NANOTECHNOLOGYIF34.9
PREAI
分享收藏
Lithium phosphorous oxynitride as a passive layer for anodes in lithium secondary batteries锂磷氧氮化物作为锂二次电池阳极的钝化层
PREAI
分享收藏Enhancement of the Li Conductivity in LiF by Introducing Glass/Crystal Interfaces通过引入玻璃/晶体界面增强LiF中的Li电导率
PREAI
分享收藏A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions液态电解质溶液中锂金属和锂化石墨阳极的失效机理的简短回顾SOLID STATE IONICS
SOLID STATE IONICSIF3.3
PREAI
分享收藏
查看更多内容