.png){kind=icon}
返回
Functionally graded cathodes for honeycomb solid oxide fuel cells
.png){kind=icon}
PRE
AI
DOI：10.1149/1.1503203.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Functionally graded cathodes were fabricated by slurry coating process for honeycomb solid oxide fuel cells with yttria-stabilized zirconia (YSZ) electrolytes. The cathodes are composed of strontium-doped lanthanum manganate (LSM), gadolinia-doped ceria, and La0.6Sr0.4Co0.2Fe0.8O3 (LSCF). The LSM content was gradually decreased, while the LSCF content was gradually increased with the increasing distance away from the electolyte-electrode interface. Scanning electron microscopy investigation and electrochemical impedance spectroscopy measurements revealed that the electrochemical performance of the graded cathodes depends sensitively on the microstructures that were primarily determined by firing temperatures. The cathodes graded in composition show interfacial resistances about 10 times lower than traditional LSM-YSZ cathodes that have similar microstructures and thickness. The graded cathode fired at low temperature has an interfacial resistance as low as 0.47 Omega cm(2) at 750degreesC, which is very encouraging for developing honeycomb fuel cells operated below 800degreesC. (C) 2002 The Electrochemical Society.
Keyword:
COMPOSITE CATHODES
PERFORMANCE
TEMPERATURE
FABRICATION
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
E
IF:
0
论文数:
590
被引数:
1
机构
暂无机构信息
引用论文
Effect of sintering temperature on microstructure and performance of LSM-YSZ composite cathodes.png)
SOLID STATE IONICS
SOLID STATE IONICSIF3.3
PREAI
分享收藏Kinetic parameters influencing the performance of IT-SOFC composite electrodesSOLID STATE IONICS
SOLID STATE IONICSIF3.3
PREAI
分享收藏
查看更多内容