.png){kind=icon}
返回
Functionally graded ferroelectric polyetherimide composites for high temperature sensing
.png){kind=icon}
OA
AI
DOI：10.1039/c7tc02649h.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
High temperature ferroelectrics for thermally stable devices that can detect pressure and temperature are of great industrial interest. Here we describe composites of lead titanate (PT) particle-polyetherimide (PEI) polymers with stable dielectric and piezoelectric properties over a broad range of temperature and frequency. The reported materials have a low dielectric loss (tan delta similar to 0.001 at 1 kHz) and a high piezoelectric voltage coefficient of 100 mV m N-1 at record temperatures of 175 degrees C. We demonstrate that a small ceramic loading leads to a significant change in thermally stable piezoelectric behavior, while the processability as well as mechanical properties remain comparable to those of the neat polymer. Careful design of the microstructure is performed by dielectrophoretic assembly of ferroelectric PT micro-particles to induce micro- wire configurations, which is shown to be a key element in attaining high functionality at low ceramic loading. Thermal imidization of the composites is performed in two steps, first partial imidization at 60 degrees C to form free standing films containing polyamic acid, followed by full imidization at 200 degrees C and 300 degrees C. The presence of highly polar polyamic acid results in higher dielectric permittivity and electrical conductivity that facilitate efficient poling. Upon complete imidization of the films at 300 degrees C the dielectric and piezoelectric properties are tested at elevated temperatures. A fully imidized composite contains completely closed imide groups, resulting in a thermally stable material with a very low dielectric loss that maintains more than 85% of its room temperature piezoelectric sensitivity up to 175 degrees C. The room temperature piezoelectric voltage coefficient shows more than 400% improvement over that of PT ceramics.
Keyword:
DIELECTRIC-PROPERTIES
PIEZOELECTRIC PROPERTIES
POLYIMIDE
SENSORS
FILMS
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.1
论文数:
2.0W
被引数:
8.0W
机构
引用论文
.png){kind=icon}
分享收藏Preparation and properties of thermostable well-functionalized graphene oxide/polyimide composite films with high dielectric constant, low dielectric loss and high strength via in situ polymerization原位聚合法制备高介电常数、低介电损耗、高强度耐高温功能化氧化石墨烯/聚酰亚胺复合薄膜及其性能研究
PREAI
分享收藏分享收藏分享收藏
查看更多内容