.png){kind=icon}
返回
Gradient-based non-linear microstructure design
.png){kind=icon}
PRE
AI
DOI：10.1016/j.jmps.2004.04.009.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Fourier analysis is implemented on the orientation distribution of a polycrystalline, microstructure. The linearity and convexity of the Fourier space, with respect to orientation, allows one to consider all possible distributions by considering all linear combinations of single-grain orientations. The limits of the Fourier space are therefore defined by the solutions to a set of linear programming problems. A unique approach to the linear programming, similar to the Krylov subspace methods for obtaining solutions to linear systems, is presented. The method is particularly efficient for this application where a large number of independent variables is often required. These solutions are then used as the constraints in the gradient-based optimization of non-linear functions within the Fourier space. In the example, Taylor yield theory and an anisotropic solution for the stress concentration around a hole in a plate of cubic-orthotropic polycrystalline material are expressed as non-linear functions within the Fourier space. The maximum obtainable ratio of Taylor factor to stress concentration for any polycrystalline orientation distribution in copper is found to be 1.22, more than double the minimum value. (C) 2004 Elsevier Ltd. All rights reserved.
Keyword:
polycrystalline material
optimization
anisotropic material
microstructures
metal plasticity
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
