.png){kind=icon}
返回
Grid-enhanced sampling moiré method for robust micro-deformation mapping under complex background noise
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ndteint.2026.103663.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Accurate deformation field quantification in high-noise environments persists as a critical limitation for grid-based optical metrology. In this study, we develop a grid enhanced sampling moiré (GE-SM) method that enables robust microscale deformation mapping under complex background noise. This method employs Fourier-domain global periodic frequency extraction to isolate deformation-carrying grid signals from contaminating noise sources, achieving superior noise immunity compared to the traditional sampling moiré (SM) method. Detailed theoretical principles are presented, and numerical simulations verify that the GE-SM method can reduce the local errors from over 100% to within ±5% under simulated noise. Furthermore, carbon fiber reinforced plastic (CFRP) specimens in-situ heating experiments were performed, and the micro-scale thermal expansion strain field evolutions of this material at room temperature up to 130 °C were quantitatively characterized by the GE-SM method. The results confirmed that the GE-SM method can significantly reduce moiré phase disturbances and measurement errors induced by the complex fiber background, elucidating the distinct microscale thermal deformation behaviors of the resin and fiber in CFRP materials. The proposed method provides a promising solution for precise deformation retrieval in extreme noise scenarios, advancing capabilities in grid-based deformation measurement techniques.
Keyword:
deformation field quantification
grid-based optical metrology
noise immunity
moiré phase extraction
microscale deformation mapping
期刊
N
IF:
4.5
论文数:
225
被引数:
0
机构
引用论文
Measurement of microscopic strain distributions of CFRP laminates with fiber discontinuities by sampling moiré method采用采样莫尔方法测量含纤维不连续性的CFRP层压板的微观应变分布
OAAI
OAAI分享收藏Plastic deformation delocalization at cryogenic temperatures in a nickel-based superalloy镍基高温合金在低温下的塑性变形离域.png)
ACTA MATERIALIA
ACTA MATERIALIAIF9.3
PREAI
分享收藏High temperature thermal and mechanical properties of high tensile carbon single filamentsCARBON
CARBONIF11.6
PREAI
分享收藏Point defect detection and strain mapping in Si single crystal by two-dimensional multiplication moire methodNANOSCALE
NANOSCALEIF5.1
PREAI
分享收藏Recent advances of interphases in carbon fiber-reinforced polymer composites: A review碳纤维增强聚合物复合材料中界面的最新进展: 综述
PREAI
分享收藏分享收藏
查看更多内容