Harmonics elimination algorithm for operational modal analysis using random decrement technique

Subodh V. Modak

doi:10.1016/j.ymssp.2010.01.001

2010-05-01

PRE

Subodh V. Modak *

DOI：10.1016/j.ymssp.2010.01.001

原文链接

原文求助

摘要

En 中文

Operational modal analysis (OMA) extracts modal parameters of a structure using their output response, during operation in general. OMA, when applied to mechanical engineering structures is often faced with the problem of harmonics present in the output response, and can cause erroneous modal extraction. This paper demonstrates for the first time that the random decrement (RD) method can be efficiently employed to eliminate the harmonics from the randomdec signatures. Further, the research work shows effective elimination of large amplitude harmonics also by proposing inclusion of additional random excitation. This obviously need not be recorded for analysis, as is the case with any other OMA method. The free decays obtained from RD have been used for system modal identification using eigen-system realization algorithm (ERA). The proposed harmonic elimination method has an advantage over previous methods in that it does not require the harmonic frequencies to be known and can be used for multiple harmonics, including periodic signals. The theory behind harmonic elimination is first developed and validated. The effectiveness of the method is demonstrated through a simulated study and then by experimental studies on a beam and a more complex F-shape structure, which resembles in shape to the skeleton of a drilling or milling machine tool. Cases with presence of single and multiple harmonics in the response are considered. (C) 2010 Elsevier Ltd. All rights reserved.

Keyword:

Harmonic elimination

Operational modal analysis

Random decrement technique

Eigen-system realization algorithm