返回
Heat transfer in horizontal solid-liquid pipe flow
DOI:10.1016/S0301-9322(99)00089-0.png)
摘要
En 中文
An experimental study of the heat transfer coefficient associated with solid-liquid mixture transport was carried out using an electro-resistance sensor and infra-red imaging. The average heat transfer increases with particle concentration. The local value of the heat transfer coefficient is strongly influenced by the cross sectional distribution of the solid phase in the pipe. At flow regimes associated with low mixture flow rates and substantial settled bed, the heat transfer at the bed periphery deteriorates because of the screen effect produced by the settled particles. In some cases, this phenomenon may cause local overheating. The analysis of the near wall structures, obtained from the temperature field, has shown that at a relatively high velocity where the bed is thin and flat the streaky structure is close to the one observed in a single phase flow, while at low mixture velocities, where the bed is thick and well packed the typical streaky structures of clear water are destroyed. It is shown that the modified Boltzman function fits the concentration profiles for the case of a moving bed regime. Good agreement is found between the bed height, obtained from experimental data, and the one predicted by the three-layer model. (C) 2000 Elsevier Science Ltd. All rights reserved.
Keyword:
slurry flow
heat transfer
concentration distribution
particle-laden flow
turbulence structure
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.8
论文数:
4.8K
被引数:
1.5W
机构
暂无机构信息
引用论文
[Citation Needed] Data Usage and Citation Practices in Medical Imaging Conferences[需要引用] 医学影像会议中的数据使用和引用规范
Study of the Polymorphism of Saturated Monoacid Triglycerides II: Polymorphic Behaviour of a 50/50 Mixture of Tripalmitin and Tristearin
Lipid / Fett
IF0

