.png){kind=icon}
返回
High-Efficiency Power Amplifier Using an Active Second-Harmonic Injection Technique Under Optimized Third-Harmonic Termination
.png){kind=icon}
PRE
AI
DOI：10.1109/TCSII.2014.2327382.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This brief presents an active second-harmonic injection technique to improve the efficiency and bandwidth for high-efficiency power amplifiers (PAs). An optimum third-harmonic termination condition was examined for higher efficiency after the second-harmonic injection using a multiharmonic load-pull simulation. It was determined that the optimum third-harmonic termination is the same as that of the inverse class-F PA. Based on this result, a high-efficiency PA with an optimized third-harmonic termination for the second-harmonic injection was designed for a center frequency of 1 GHz as a main amplifier. The overall system requires an auxiliary second-harmonic amplifier and a diplexer between the main and auxiliary PAs. The PA with an optimized third-harmonic termination for the second-harmonic injection was implemented using a 10-W GaN high-electron-mobility transistor for both the main and auxiliary power stages. Compared with the PA without second-harmonic injection, the bandwidth with a power-added efficiency of more than 80% is extended from 60 (960-1020 MHz) to 180 MHz (880-1060 MHz) after the second-harmonic injection.
Keyword:
High-efficiency power amplifier (PA)
inverse class-F PA
second-harmonic injection
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
I
IF:
4.9
论文数:
8.8K
被引数:
2.5W
机构
引用论文
Themis: A Software to Assess Association Free Energies via Direct Estimative of Partition Functions.png)
OAAI
IF0
OAAI分享收藏
没有更多内容
没有更多内容