返回
High-Performance Alginate-Poly(ethylene oxide)-Based Solid Polymer Electrolyte
DOI:10.1021/acsami.4c22242.png)
摘要
En 中文
固态聚合物电解质(SPEs)因其有望解决液态电解质引发的安全问题而受到广泛关注。然而,其低离子传输能力、不足的机械强度以及不理想的阻燃性能极大地限制了其进一步应用。在此,我们通过引入静电纺丝制备的钙 alginate(CA)纳米纤维膜作为骨架,设计了一种聚乙烯醇(PEO)基SPE。CA大分子中的丰富C=O和-OH基团不仅有效削弱了锂离子(Li+)的配位环境,还促进了LiTFSI的解离,有助于Li+沿PEO聚合物链迁移并提供有效的Li+传输通道。在交联过程中引入钙离子(Ca2+)改善了SPE的阻燃性能。所得SPE表现出高离子电导率(3.86×10⁻⁴ S cm⁻¹,30°C)、优异的机械强度(2.01 MPa)和宽广的电化学窗口(5.32 V)。组装的锂对称电池在30°C下可实现3000小时的稳定锂沉积/剥离。同时,LiFePO4(LFP)/Li全固态锂金属电池在0.3 C和30°C下经过300次循环后展现出优异的循环稳定性,具有高放电容量(141.2 mAh g⁻¹)和保持率(92.5%)。
Keyword:
alginate
poly(ethylene oxide)
nanofiber membrane
solid polymer electrolyte
ion conductivity
期刊
IF:
8.2
论文数:
6.1W
被引数:
38.7W
机构
引用论文
Synergistic effect of Ti3C 2Tx MXene/PAN nanofiber and LLZTO particles on high-performance PEO-based solid electrolyte for lithium metal batteryTi3C 2Tx MXene/PAN纳米纤维和LLZTO颗粒对锂金属电池用高性能PEO基固体电解质的协同作用
Solid-state Al-air battery with an ethanol gel electrolyte具有乙醇凝胶电解质的固态Al-空气电池
energy environment
IF14.6
3D structural lithium alginate-based gel polymer electrolytes with superior high-rate long cycling performance for high-energy lithium metal batteries用于高能锂金属电池的具有优异高倍率长循环性能的3D结构海藻酸锂基凝胶聚合物电解质
Electrospinning alginate-based nanofibers: From blends to crosslinked low molecular weight alginate-only systems静电纺丝藻酸盐基纳米纤维: 从共混物到交联的低分子量藻酸盐体系
CARBOHYDRATE POLYMERS
IF12.5
A safe anode-free lithium metal pouch cell enabled by integrating stable quasi-solid electrolytes with oxygen-free cathodes通过将稳定的准固体电解质与无氧阴极集成在一起,可以实现安全的无阳极锂金属袋电池
Poly(ethylene oxide)/Poly(vinylidene fluoride)/Li6.4La3Zr1.4ATa0.6O12 composite electrolyte with a stable interface for high performance solid state lithium metal batteries用于高性能固态锂金属电池的具有稳定界面的聚 (环氧乙烷)/聚偏氟乙烯/Li6.4La3Zr1.4ATa0.6O12复合电解质
Fluorinated Li10GeP2S12 Enables Stable All-Solid-State Lithium Batteries氟化Li10GeP2S12可实现稳定的全固态锂电池
ADVANCED MATERIALS
IF26.8
Alginate-based nanofibrous scaffolds: Structural, mechanical, and biological properties
ADVANCED MATERIALS
IF26.8

