返回
High-Performance Graphene-Based Cementitious Composites
DOI:10.1002/advs.201801195.png)
摘要
En 中文
This study reports on the development of a cementitious composite incorporating electrochemically exfoliated graphene (EEG). This hybrid functional material features significantly enhanced microstructure and mechanical properties, as well as unaffected workability; thus, it outperforms previously reported cementitious composites containing graphene derivatives. The manufacturing of the composite relies on a simple and efficient method that enables the uniform dispersion of EEG within cement matrix in the absence of surfactants. Different from graphene oxide, EEG is found to not agglomerate in cement alkaline environment, thereby not affecting the fluidity of cementitious composites. The addition of 0.05 wt% graphene content to ordinary Portland cement results in an increase up to 79%, 8%, and 9% for the tensile strength, compressive strength, and Young's modulus, respectively. Remarkably, it is found that the addition of EEG promotes the hydration reaction of both alite and belite, thus leading to the formation of a large fraction of 3CaO center dot 2SiO(2)center dot 3H(2)O(C-S-H) phase. These findings represent a major step forward toward the practical application of nanomaterials in civil engineering.
Keyword:
consistency
electrochemically exfoliated graphene
mechanical properties
Portland cement
structural characterization
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
14.1
论文数:
1.8W
被引数:
11.5W
机构
引用论文
Effects of graphene oxide aggregates on hydration degree, sorptivity, and tensile splitting strength of cement paste氧化石墨烯骨料对水泥浆水化程度、吸着率和劈裂抗拉强度的影响
Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix碳纳米管的分散性及其对水泥基体力学性能的影响
Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes
CARBON
IF11.6

