返回
High-performance polymer-based regenerative elastocaloric cooler
DOI:10.1016/j.applthermaleng.2023.120016.png)
摘要
En 中文
Alternative methods of refrigeration are critical for performance optimization and environ- mental sustainability. Prototype systems using caloric materials have shown the advantages of a high coefficient of performance (COP) and low global warming potential. Elastocaloric elastomers can meet ongoing needs, but their implementation in functional heat pumps or coolers remains challenging due to their requirement for a large deformation and low thermal conductivity. Moreover, a scalable design is required to achieve high cooling power. As a leap forward for the use of polymers in larger scale caloric devices, we developed experimental elastocaloric polymer coolers with two different geometries using natural rubber tubes. We confirmed that a suitable geometry partially compensated for the low thermal conductivity and led to performances comparable to those of other caloric devices. Several operating conditions were tested to determine the optimal temperature span, cooling power, and COP for both device geometries. Under a specific operating condition, one of the prototypes exhibited a maximum temperature span > 8 K, a maximum COP of 6, and an output cooling power of 1.5 W; this power outperforms other prototypes based on polymers or ceramics. The parallelization of rubber tubes will facilitate realistic elastocaloric polymer coolers on a larger scale.
Keyword:
Solid -state cooling
Caloric materials
Active regeneration
Elastocaloric
Natural rubber
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.9
论文数:
2.8W
被引数:
10.6W
机构
引用论文
A multi-objective discrete reliability optimization problem for dissimilar-unit standby systems
OR Spectrum
IF0

