返回
High Performance Vanadium Redox Flow Battery Electrodes
DOI:10.1115/1.4062441.png)
摘要
En 中文
A high temperature ammonia treatment was applied to carbon felt electrodes to enhance vanadium redox flow battery (VRFB) performance. Samples were heated to 900 degrees C in the presence of ammonia gas for up to 4 h. While all heating times resulted in an overall improvement in current density at 80% voltage efficiency, samples treated for 4 h showed the greatest increase in current density (325%) compared to untreated carbon felt. Raman spectroscopy showed a 74% increase in edge sites as a result of the 4 h treatment. Electrochemical surface area increased by 142% and scanning electron microscopy showed the appearance of pores on felt fiber surfaces, indicating that the performance improvement may be due to enhanced surface area in addition to functionalization. Impedance spectroscopy showed decreased charge transfer resistance and increased durability (during cycling) compared to other published electrode treatments. These results indicate that heated ammonia can be used to increase the performance of electrodes for vanadium flow battery applications, with excellent durability.
Keyword:
vanadium redox flow battery
graphite felt
electrode modification
ammonia gas
surface area
pores
advanced materials characterization
batteries
electrochemical storage
flow batteries
innovative material synthesis and manufacturing methods
reliability
durability
and damage tolerance
期刊
IF:
1.9
论文数:
367
被引数:
1.0K
机构
引用论文
A high-performance dual-scale porous electrode for vanadium redox flow batteries用于钒氧化还原液流电池的高性能双尺度多孔电极
Influence of Fenton's reagent treatment on electrochemical properties of graphite felt for all vanadium redox flow batteryFenton试剂处理对全钒液流电池石墨毡电化学性能的影响
ELECTROCHIMICA ACTA
IF5.6
HF/H2O2 treated graphite felt as the positive electrode for vanadium redox flow batteryHF/H2O2处理的石墨毡作为钒氧化还原液流电池的正极
A review on surface modification of activated carbon for carbon dioxide adsorption活性炭表面改性吸附二氧化碳的研究进展

