.png){kind=icon}
.png){kind=icon}
返回
High-Precision Attitude Estimation Based on Differential IMU Array
.png){kind=icon}
PRE
AI
DOI：10.1109/JSEN.2024.3406914.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
To solve the low precision and poor anti-interference of a single microelectromechanical system (MEMS) inertial sensor, this article proposes a high-precision attitude estimation system based on differential inertial measurement unit (IMU) array. Based on the output characteristics of a single MEMS inertial sensor, the output performances of the differential IMU array are analyzed, which show effective improvements for the bias stability and random noise compared to a single MEMS inertial sensor. Moreover, the attitude estimation algorithms based on the Kalman filter and complementary filter are used to fuse data from sensors and calculate the attitude. The experimental results show that the error of angular rate of the differential IMU array is reduced by 79.7% and the standard deviation (STD) of the attitude measurement results is reduced by about 75% compared with that of a single sensor in both static state and dynamic state. The estimated absolute roll angle and pitch angle errors are within 0.4 degrees in dynamic state which are the state-of-the-arts results to date. This study can be effectively used for the smart and wearable devices and industrial automation in the emerging areas.
Keyword:
Sensors
Sensor arrays
Estimation
Micromechanical devices
Inertial sensors
Noise
Gyroscopes
Attitude estimation
data fusion
differential IMU array
microelectromechanical system (MEMS)